Thursday 14 June 2012

EASA PART-66 MODULE 16 : PISTON ENGINE


16.1 Fundamentals (level 2)
Mechanical, thermal and volumetric efficiencies;
Operating principles — 2 stroke, 4 stroke, Otto and Diesel;
Piston displacement and compression ratio;
Engine configuration and firing order.


16.2 Engine Performance (level 2)
Power calculation and measurement;
Factors affecting engine power;
Mixtures/leaning, pre-ignition.


16.3 Engine Construction (level 2)
Crank case, crank shaft, cam shafts, sumps;
Accessory gearbox;
Cylinder and piston assemblies;
Connecting rods, inlet and exhaust manifolds;
Valve mechanisms;
Propeller reduction gearboxes.


16.4 Engine Fuel Systems (level 2)
16.4.1 Carburettors
Types, construction and principles of operation;
Icing and heating.
16.4.2 Fuel injection systems
Types, construction and principles of operation
16.4.3 Electronic engine control
Operation of engine control and fuel metering systems including electronic engine control (FADEC);
Systems lay-out and components.


16.5 Starting and Ignition Systems (level 2)
Starting systems, pre-heat systems;
Magneto types, construction and principles of operation;
Ignition harnesses, spark plugs;
Low and high tension systems.


16.6 Induction, Exhaust and Cooling Systems (level 2)
Construction and operation of: induction systems including alternate air systems;
Exhaust systems, engine cooling systems — air and liquid.


16.7 Supercharging/Turbocharging (level 2)
Principles and purpose of supercharging and its effects on engine parameters;
Construction and operation of supercharging/turbocharging systems;
System terminology;
Control systems;
System protection.


16.8 Lubricants and Fuels (level 2)
Properties and specifications;
Fuel additives;
Safety precautions.


16.9 Lubrication Systems (level 2)
System operation/lay-out and components.


16.10 Engine Indication Systems (level 2)
Engine speed; Cylinder head temperature;
Coolant temperature; Oil pressure and temperature;
Exhaust Gas Temperature; Fuel pressure and flow;
Manifold pressure.


16.11 Powerplant Installation (level 2)
Configuration of firewalls, cowlings, acoustic panels, engine mounts, anti-vibration mounts, hoses, pipes, feeders, connectors, wiring looms, control cables and rods, lifting points and drains.


16.12 Engine Monitoring and Ground Operation (level 3)
Procedures for starting and ground run-up;
Interpretation of engine power output and parameters;
Inspection of engine and components: criteria, tolerances, and data specified by engine manufacturer.


16.13 Engine Storage and Preservation (level 2)
Preservation and depreservation for the engine and accessories/systems.

18 comments:

  1. Anybody have EASA part-66, module-16: Piston Engine Multiple Question. If you have any soft copy pls send me in this e-mail ID: ahsan1207@yahoo.com

    ReplyDelete
  2. Abdelgadir Ahmed
    would you please send EASA part-66 Module 16 Piston engine multiple question if you have.
    my e-mail(elsheikh117@yahoo.com

    ReplyDelete
  3. anybody with EASA moule 16,piston engine multiple quiz please help.my email is muyekah@gmail.com

    ReplyDelete
  4. hii if anyone is havin mod 16 quetions, please mail it to domfern2006@yahoo.co.in ... Thankx a ton .. cheers

    ReplyDelete
  5. Hi, I bought it and I could send it if anybody wants to share the costs. 43€ payed. (danieljcarvalho@gmail.com)

    ReplyDelete
    Replies
    1. im ready to payed ,tell me how i can get them

      Delete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Please can i have the questions ?
    Banane60007@gmail.com

    ReplyDelete
  8. plz if you have exam tell me

    ReplyDelete
  9. Hi, pls kontakt me if someone have questions for M16

    linsikrocha@hotmail.com

    ReplyDelete
  10. if anyone has piston engine question bank please email to hasithawijee@gmail.com

    ReplyDelete
  11. Please tell me where to find piston engine question bank leeleroyghandhi2@gmail.com

    ReplyDelete
  12. if anyone has module 16 questions please email me to xristostsouvalis1@hotmail.com

    ReplyDelete
  13. if anyone has module 16 questions please email me to giorgostzabazis@gmail.com

    ReplyDelete
  14. Need module 16 question! If anyone have them plz send them to: panos93-7@hotmail.com. Thank you!

    ReplyDelete
  15. DG CAA module 16 MCQs required. If some one could help me?
    qurbanali437@gmail.com

    ReplyDelete
  16. Would you please help me by providing Module 16 piston engine question bank
    qurbanali437@gmail.com

    ReplyDelete
    Replies
    1. If you have it please send it to me
      algayli25@gmail.com

      Delete